Meowth wrote:
I'm not going to sound like I know exactly what is wrong, but if you can reproduce it every time just by logging in I doubt it is the monitor. There is an unlikely possibility the cable is just bad instead of the whole thing. There is something you can try with the graphic card though. You can bake it at 385F for 6-10 minutes.
http://hardforum.com/showthread.php?t=1421792http://www.overclockers.com/forums/show ... ?p=6102931Actually you should try this with your 8800s too, Weena.
This is a very bad idea because printed circuit boards are made with solder and other materials containing heavy metals. Heating the printed circuit board runs the risk of inhaling those heavy metals or absorbing them through the skin, or through food subsequently cooked in the same oven.
Exposure to solder is a very serious health hazard, enough so that working with solder has strict occupational guidelines and is illegal except in strictly regulated settings. Even if the solder is lead-free it will still contain cobalt and mercury (which is very dangerous to inhale and can cause cumulative, long-term damage).
PCBs also contain metals such as magnesium and chromium that are inert at room temperature but become dangerously volatile at high temperatures. They burn very hot and are prone to explosive combustion. It's like playing with Thermite.
Because PCBs are comprised of many different materials, components that might not normally be flammable at the temperature of an oven may potentially be ignited by other components with lower flashpoints. The paints and dyes used on creatively-colored graphics card heatsinks are particularly toxic and volatile.
There is also the risk that heating the graphics card may cause insulation to fray and the fans and power mechanisms to fail, causing the card to catch fire or explode when plugged in and powered on.
idk, I'd assume it's common sense. Quite frankly, anyone who seriously uses an oven to melt their graphics card solder is fucking stupid.